|
In Stock: 185
... more info |
Air box / filter mount for all 125 Spec Honda motors Model: 5100 Manufacturer: HEGAR
Price: $75.00
Weight: 2lbs
Date Added: Saturday 14 February, 2009 |
Air Filter & Air box mount support for the spec and Open 99 Honda CR 125. This Stainless steel bracket with foam padded cradle and bungee fasteners ... more info |
|
In Stock: 9
... more info |
428 Hegar sprag sprockets Model: 8020 Manufacturer: HEGAR
Price: $54.95
Weight: 1.5lbs
Date Added: Saturday 14 February, 2009 |
For use with the Hegar sprag only. 6 pin special for the 50mm sprag, 4 pin sprocket for the 35mm and 1.25" sprag models and 6 pin sprockets for the ... more info |
|
In Stock: 3
Add: |
Sprag Internal drive gear Model: 8030 Manufacturer: HEGAR
Price: $125.00
Weight: 1lbs
Date Added: Saturday 14 February, 2009 |
Internal drive ramp for the sprag hub. Watch for wearing around the teeth of your internal drive and replace if worn oversize. |
|
In Stock: 98
Add: |
Sprag Sprocket Stud Model: 8050 Manufacturer: HEGAR
Price: $7.50
Weight: 0.2lbs
Date Added: Saturday 14 February, 2009 |
Replacement stud for all Hegar 4 pin sprag models. Red Locktite is highly recommended when replacing. |
|
In Stock: 76
Add: |
Sprag Nut 3/8-24 Model: 8040 Manufacturer: HEGAR
Price: $1.50
Weight: 0.2lbs
Date Added: Saturday 14 February, 2009 |
Replacement nut for all 4 pin Hegar sprag units. |
|
In Stock: 11
Add: |
50mm Hegar Sprag Hub Model: 8000 Manufacturer: HEGAR
Price: $799.00
Weight: 6lbs
Date Added: Saturday 14 February, 2009 |
Designed with competitor safety in mind Hegar offers the 50mm axle sprag assembly. Engine lock up followed by axle lock up from mechanical failure ... more info |
|
In Stock: 48
Add: |
Tubeless Kit for 5" & 6" Spun Aluminum Wheel Model: 7100 Manufacturer: HEGAR
Price: $19.95
Weight: 1lbs
Date Added: Saturday 14 February, 2009 |
Works with all Hegar 5" or 6" spun Aluminum wheels. Comes complete with 3 nuts, 3 bolts, 3 washers and 1 valve stem. |
|
In Stock: 85
Add: |
6" Disk Brake Hub (5/8 bearing) Model: 7700 Manufacturer: HEGAR
Price: $125.00
Weight: 2lbs
Date Added: Saturday 14 February, 2009 |
Replacement hub for the 5" Hegar brake disk hub. Comes with standard 5/8 (0.625) bearing, brake disk studs installed, 5/16 x 1.25" bolts, nylock nuts ... more info |
|
In Stock: 90
Add: |
Standard Wheel Hub Model: 7800 Manufacturer: HEGAR
Price: $75.00
Weight: 2lbs
Date Added: Saturday 14 February, 2009 |
Comes with 5/8 bearings, 5/16 x 1.25" bolts, nylock nuts and washers. |
|
In Stock: 100
Add: |
Nose Wheel Hub - MX offset Model: 7300 Manufacturer: HEGAR
Price: $65.00
Weight: 1.5lbs
Date Added: Saturday 14 February, 2009 |
For use without brakes. Comes complete with 5/8 bearings, 6, 5/16 x 1.25" bolts, 6 nylock nuts, 12 washers and a valve stem. This hub must be used ... more info |
|